ES3A-E3/57T SURFACE MOUNT ULTRAFAST EFFICIENT PLASTIC RECTIFIER
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0
♦ For surface mount applications
♦ Low profile package
♦ Built-in strain relief
♦ Ideal for automated placement
♦ Easy pick and place
♦ Superfast recovery time for high efficiency
♦ Glass passivated chip junction
♦ High temperature soldering: 250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic body over passivated chip
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end Weight: 0.007 ounces, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
| | SYMBOLS | ES3A | ES3B | ES3C | ES3D | UNIT |
| Device marking code | | EA | EB | EC | ED | |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 150 | 200 | Volts |
| Maximum RMS voltage | VRMS | 35 | 70 | 105 | 140 | Volts |
| Maximum DC blocking voltage | VDC | 50 | 100 | 150 | 200 | Volts |
| Maximum average forward rectified current at TL=100°C | I(AV) | 3.0 | Amps |
| Peak forward surge current 8.3ms single half sine-wave superimposed on IFSM 100.0 Amps rated load (JEDEC Method) at TL=100°C | IFSM | 100.0 | Amps |
| Maximum instantaneous forward voltage at 3.0A | VF | 0.90 | Volts |
| Maximum DC reverse current TA=25°C 10.0 at rated DC blocking voltage TA=100°C | IR | 10.0 500.0 | µA |
| Maximum reverse recovery time (NOTE 1) | Trr | 20.0 | Amps |
| Maximum reverse recovery time TJ=25°C 30.0 (NOTE 2) TJ=100°C | Trr | 30.0 50.0 | Amps |
| Maximum stored charge TJ=25°C 15.0 (NOTE 2) TJ=100°C | Qrr | 15.0 35.0 | Amps |
| Typical junction capacitance (NOTE 3) | CJ | 45.0 | pF |
| Typical thermal resistance (NOTE 4) | RΘJA RΘJL | 47.0 12.0 | °C/w |
| Operating junction and storage temperature range | TJ, TSTG | -50 to +150 | °C |
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) trr and Qrr measured at: VR=30V, di/dt=50A/µs, IF=3.0A, and Irr=10% IR
(3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(4) Units mounted on P.C.B. with 0.31 x 0.31” (8.0 x 8.0mm) copper pad areas
Product Tags:
|
|
Led Diode ZA Tablice Images
|
